PowerBox Royal SRS

$790,00 USD

Here at PowerBox-Systems we have developed a new High-End product designed to provide supreme functionality and security for the demanding pilot.


  1. Integral iGyro: triple-axis gyro system with heading function and set-up assistant
  2. Six independent gyro outputs for: 2x ailerons, 2x elevators, 2x rudders
  3. GPS-regulated gyro gain
  4. Special regulatory algorithm for fixed-wing model aircraft
  5. Extremely accurate triple-axis MEMS sensor
  6. Integral Delta and V-tail mixer
  7. Door sequencer: six freely programmable outputs with set-up assistant
  8. PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems
  9. Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
  10. SRS: Serial Receiver System provides the facility to use receivers with serial interface: Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti, Multiplex M-Link, HoTT and JR X-BUS
  11. Unrestricted channel assignment for all 24 PowerBox outputs
  12. Graphic LCD screen with 128 x 64 pixels
  13. Extremely user-friendly menu-based programming using the SensorSwitch
  14. Up to 18 channels - depending on the radio control system in use
  15. Signal amplification and interference suppression for all 24 outputs
  16. Flight recorder, recording of lost frames, fail-safe events and all battery data
  17. Variable frame rate, range 9ms – 21ms
  18. Two 16-bit processors for fast, high-resolution signal processing
  19. 2 x double-regulated output voltages for receivers and servos
  20. 2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
  21. Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink bus systems
  22. Direct transmission of all battery informations, receiver data and GPS data to the transmitter
  23. Separate voltage and capacity display for each battery
  24. Minimum value memory alerts the user to voltage collapses
  25. Large-area heat-sinks for high regulator performance
  26. Regulator monitoring, regulator error indicator
  27. Support for three battery types: LiPo, NiMH / NiCd, LiFePo
  28. Suppression of any servo feedback currents which may occur
  29. Updateable with PowerBox Systems USB Interface connectors

Technical Data

Operating voltage: 4.0V - 9.0V
Power supply: 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state:185mA (with LCD)
Current drain Standby:30µA
Maximum load current:Peak 4x20A
Drop-out voltage:0.3V
Output voltage:5.9V and/or 7.4V regulated
Signal input:serial
Supported RC systems:Spektrum, Futaba, HoTT, M-Link, Jeti, JR
Receiver redundancy:SRS
Servo sockets:24
Programmable servo outputs:24
Servo signal resolution:0.5µs
Signal frame rate:9ms, 12ms, 15ms, 18ms, 21ms
Integral gyro system:iGyro
Gyro regulation:Heading- and Normalmode
Gyro sensor type:MEMS
Number of sensor axes:3
Screen:LCD, backlite
Integral door sequencer:yes
Supported telemetry systems:Futaba, Jeti, Spektrum, HoTT, M-Link
Dimensions:136 x 82 x 20 mm
Weight Sensor Switch:15g
Weight of LCD screen:65g
Temperature range:-30°C bis +75°C