PowerBox Competition

$370,00 USD

The PowerBox Competition 2010 is the logical development of the original Competition power supply system with regulated output voltage, which was first introduced back in 2003. The range of applications for this backer is virtually limitless due to the large number of integral features.


  1. Servo-Match function: servo centre, end-points and reverse for 4 channels and 8 servos
  2. Graphic OLED screen with 128 x 64 pixels
  3. Extremely user-friendly menu-based programming using the SensorSwitch
  4. 12 channels
  5. Signal amplification and interference suppression for all 18 outputs
  6. Variable frame rate, range 9ms – 21ms
  7. 16-bit processor for fast, high-resolution signal processing
  8. double-regulated output voltages for receivers and servos
  9. regulated voltage with selection facility, 5.9V or 7.4V
  10. Connection facilities for Spektrum, HoTT and Multiplex MSB downlink bus systems
  11. Direct transmission of battery voltage and capacity to the transmitter
  12. Separate voltage and capacity display for each battery
  13. Minimum value memory alerts the user to voltage collapses
  14. Large-area heat-sinks for high regulator performance
  15. Regulator monitoring, regulator error indicator
  16. Support for three battery types: LiPo, NiMH / NiCd, LiFePo
  17. Suppression of any servo feedback currents which may occur
  18. Updateable with PowerBox Systems USB Interface connectors

Technical Data

  1. Operating voltage:4.0V - 9.0V
  2. Power supply:2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
  3. Current drain Power-on state:130mA
  4. Current drain Standby:15µA
  5. Maximum load current:Peak 2x20A
  6. Drop-out voltage:0.3V
  7. Output voltage:5.9V and/or 7.4V regulated
  8. Signal input:PWM
  9. Channels:12
  10. Servo sockets:21
  11. Programmable servo outputs:4 channels, 8 servos
  12. Servo signal resolution:0.5µs
  13. Signal frame rate:9ms, 12ms, 15ms, 18ms, 21ms
  14. Screen:OLED 128 x 64 pixels, graphic
  15. Supported telemetry systems:Spektrum, HoTT, M-Link
  16. Dimensions:110 x 72 x 24 mm
  17. Weight:115g
  18. Weight Sensor Switch:15g
  19. Temperature range:-30°C to +75°C