PowerBox Champion SRS

Here at PowerBox-Systems we have developed a new High-End product designed to provide supreme functionality and security for the demanding pilot.

Features

1. PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems
2. Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
3. Door sequencer: six freely programmable outputs with set-up assistant
4. SRS: Serial Receiver System provides the facility to use receivers with serial interface: Spektrum DSM2 and DSMX, Multiplex M-Link, Futaba S-Bus, HoTT, JR X-BUS and Jeti R-SAT2
5. Unrestricted channel assignment for all 24 PowerBox outputs
6. Graphic LCD screen with 128 x 64 pixels
7. Extremely user-friendly menu-based programming using the SensorSwitch
8. Up to 18 channels - depending on the radio control system in use
9. Signal amplification and interference suppression for all 24 outputs
10. Flight recorder, recording of lost frames, fail-safe events and all battery data
11. Variable frame rate, range 9ms – 21ms
12. Two 16-bit processors for fast, high-resolution signal processing
13. 2 x double-regulated output voltages for receivers and servos
14. 2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
15. Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink bus systems
16. Direct transmission of battery voltage, capacity, RX-data and GPS data to the transmitter
17. Separate voltage and capacity display for each battery
18. Minimum value memory alerts the user to voltage collapses
19. Large-area heat-sinks for high regulator performance
20. Regulator monitoring, regulator error indicator
21. Support for three battery types: LiPo, NiMH / NiCd, LiFePo
22. Suppression of any servo feedback currents which may occur
23. Updateable with PowerBox Systems USB Interface connectors

Technical Data

1. Operating voltage:4.0V - 9.0V
2. Power supply:2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
3. Current drain Power-on state:185mA (with LCD)
4. Current drain Standby:30µA
5. Maximum load current:Peak 4x20A
6. Drop-out voltage:0.3V
7. Output voltage:5.9V and/or 7.4V regulated
8. Signal input:serial
9. Supported RC systems:Spektrum, Futaba, HoTT, M-Link, Jeti, JR
10. Receiver redundancy:SRS
11. Channels:18
12. Servo sockets:24
13. Programmable servo outputs:24
14. Servo signal resolution:0.5µs
15. Signal frame rate:9ms, 12ms, 15ms, 18ms, 21ms
16. Screen:LCD, backlite
17. Integral door sequencer:yes
18. Supported telemetry systems:Futaba, Jeti, Spektrum, HoTT, M-Link
19. Dimensions:136 x 82 x 20 mm
20. Weight:158g
21. Weight Sensor Switch:15g
22. Weight of LCD screen:65g
23. Temperature range:-30°C to +75°C