The PowerBox Competition 2010 is the logical development of the original Competition power supply system with regulated output voltage, which was first introduced back in 2003. The range of applications for this backer is virtually limitless due to the large number of integral features.
Features
- Servo-Match function: servo centre, end-points and reverse for 4 channels and 8 servos
- Graphic OLED screen with 128 x 64 pixels
- Extremely user-friendly menu-based programming using the SensorSwitch
- 12 channels
- Signal amplification and interference suppression for all 18 outputs
- Variable frame rate, range 9ms – 21ms
- 16-bit processor for fast, high-resolution signal processing
- double-regulated output voltages for receivers and servos
- regulated voltage with selection facility, 5.9V or 7.4V
- Connection facilities for Spektrum, HoTT and Multiplex MSB downlink bus systems
- Direct transmission of battery voltage and capacity to the transmitter
- Separate voltage and capacity display for each battery
- Minimum value memory alerts the user to voltage collapses
- Large-area heat-sinks for high regulator performance
- Regulator monitoring, regulator error indicator
- Support for three battery types: LiPo, NiMH / NiCd, LiFePo
- Suppression of any servo feedback currents which may occur
- Updateable with PowerBox Systems USB Interface connectors
Technical Data
- Operating voltage:4.0V - 9.0V
- Power supply:2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
- Current drain Power-on state:130mA
- Current drain Standby:15µA
- Maximum load current:Peak 2x20A
- Drop-out voltage:0.3V
- Output voltage:5.9V and/or 7.4V regulated
- Signal input:PWM
- Channels:12
- Servo sockets:21
- Programmable servo outputs:4 channels, 8 servos
- Servo signal resolution:0.5µs
- Signal frame rate:9ms, 12ms, 15ms, 18ms, 21ms
- Screen:OLED 128 x 64 pixels, graphic
- Supported telemetry systems:Spektrum, HoTT, M-Link
- Dimensions:110 x 72 x 24 mm
- Weight:115g
- Weight Sensor Switch:15g
- Temperature range:-30°C to +75°C
